Mechanical behavior of holographic material in a high vacuum and with temperature changes
Empreu sempre aquest identificador per citar o enllaçar aquest ítem
http://hdl.handle.net/10045/9738
Títol: | Mechanical behavior of holographic material in a high vacuum and with temperature changes |
---|---|
Autors: | Fimia Gil, Antonio | Méndez Penín, María Jesús | Ulibarrena Estévez, Manuel | Mallavia Marín, Ricardo | Beléndez, Tarsicio | Cabeza, Isabel | Rodríguez, Fernando |
Grups d'investigació o GITE: | Holografía y Procesado Óptico |
Centre, Departament o Servei: | Universidad de Alicante. Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal | Universidad Miguel Hernández. Departamento de Ciencia de Materiales, Óptica y Tecnología Electrónica | Construcciones Aeronaúticas S.A. |
Paraules clau: | Optical materials | Mechanical behaviour | Thermal behaviour | Holographic recording materials | Photopolymers |
Àrees de coneixement: | Óptica | Física Aplicada |
Data de creació: | 1999 |
Data de publicació: | 17-de març-2000 |
Editor: | SPIE, The International Society for Optical Engineering |
Citació bibliogràfica: | FIMIA GIL, Antonio, et al. "Mechanical behavior of holographic material in a high vacuum and with temperature changes". En: Practical holography XIV and holographic materials VI : 24-25 January 2000, San Jose, California. Bellingham, Wash. : SPIE, 2000. (Proceedings of SPIE; Vol. 3956). ISBN 978-0-81943-574-3, pp. 306-313 |
Resum: | Evaluation of the mechanical properties of films of the materials currently employed for recording diffractive optical elements is very important in order to foresee their mechanical behavior during the photochemical processing following recording of the interference pattern. This will also provide information about the mechanical and thermal stability of holograms recorded on these materials, which may be tested in the different environments in which the final application of the optical elements will be used. For quantitative evaluation of these properties in an acrylamide based photopolymeric system, a study was carried out on layers of films of polyvinylalcohol and polyvinylalcohol mixed with triethanolamine. Layers coated on glass substrate were subjected to both a high vacuum and temperature changes. Real time measurements of optical path variations in the film were performed using a vacuum interferometric measurement system. |
Patrocinadors: | This work was financed by IMPIVA and by Direcció General d'Ensenyaments i Investigació (Generalitat Valenciana, Spain), project GV-C-CN-06-064-96. |
URI: | http://hdl.handle.net/10045/9738 |
ISBN: | 978-0-81933-574-3 |
ISSN: | 0277-786X |
DOI: | 10.1117/12.380010 |
Idioma: | eng |
Tipus: | info:eu-repo/semantics/article |
Drets: | Copyright 2000 Society of Photo-Optical Instrumentation Engineers. This paper was published in Proceedings of SPIE, Vol. 3956, and is made available as an electronic reprint with permission of SPIE. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. |
Revisió científica: | si |
Versió de l'editor: | http://dx.doi.org/10.1117/12.380010 |
Apareix a la col·lecció: | INV - GHPO - Artículos de Revistas INV - GHPO - Comunicaciones a Congresos, Conferencias, etc. |
Arxius per aquest ítem:
Arxiu | Descripció | Tamany | Format | |
---|---|---|---|---|
SPIE_v3956_p306_2000.pdf | 425,02 kB | Adobe PDF | Obrir Vista prèvia | |
Tots els documents dipositats a RUA estan protegits per drets d'autors. Alguns drets reservats.