Oxygen Scavenger and Antioxidant LDPE/EVOH/PET-Based Films Containing β-Carotene Intended for Fried Peanuts (Arachis hypogaea L.) Packaging: Pilot Scale Processing and Validation Studies

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10045/127059
Información del item - Informació de l'item - Item information
Título: Oxygen Scavenger and Antioxidant LDPE/EVOH/PET-Based Films Containing β-Carotene Intended for Fried Peanuts (Arachis hypogaea L.) Packaging: Pilot Scale Processing and Validation Studies
Autor/es: Juan-Polo, Adriana | Maestre, Salvador E. | Monedero Prieto, María | Sánchez Reig, Carmen | Tone, Ana María | Herranz Solana, Nuria | Beltrán Sanahuja, Ana
Grupo/s de investigación o GITE: Análisis de Alimentos, Química Culinaria y Nutrición (AAQCN)
Centro, Departamento o Servicio: Universidad de Alicante. Departamento de Química Analítica, Nutrición y Bromatología
Palabras clave: Oxidative stability | Beta-carotene | Oxygen absorber film | Fried peanuts | Antioxidant capacity | Active food packaging
Fecha de publicación: 29-ago-2022
Editor: MDPI
Cita bibliográfica: Juan-Polo A, Maestre Pérez SE, Monedero Prieto M, Sánchez Reig C, Tone AM, Herranz Solana N, Beltrán Sanahuja A. Oxygen Scavenger and Antioxidant LDPE/EVOH/PET-Based Films Containing β-Carotene Intended for Fried Peanuts (Arachis hypogaea L.) Packaging: Pilot Scale Processing and Validation Studies. Polymers. 2022; 14(17):3550. https://doi.org/10.3390/polym14173550
Resumen: The aim of this study was to develop an oxygen scavenger and antioxidant active packaging material for fried peanuts. The packaging solution, which has been made at the laboratory previously, has been developed by cast film extrusion and is composed of low-density polyethylene-ethylene vinyl alcohol-polyethylene terephthalate (LDPE/EVOH/PET)-based films containing β-carotene (CAR). In comparison with film without additive, developed film presented an orange colouring (higher L* and b* values and lower a* values) and an increase in oxygen induction time (OIt) from 4.5 to 14.1 min. The incorporation of β-carotene to the formulation also brings about a significant effect on the thermal stability as maximum degradation temperatures increased around 1%. Regarding the oxygen absorption capacity of the films, values of 1.39 ± 0.10 mL O2 per g of film at laboratory scale and 1.7 ± 0.3 mL O2 per g of multilayer (ML)/LDPE_CAR were obtained, respectively, after 3 days, proving the suitability of the packaging solutions as oxygen absorbers. To validate the packaging solution, the oxidative stability of fried peanuts packed in fabricated multilayer β-carotene bags was evaluated for 3 months at 40 °C. The hexanal content remained constant during this period. Meanwhile, peanuts packed in ML without β-carotene increased their hexanal content to 294%. This fact indicated a lower extent of oxidation in fried peanuts compared to food samples packaged in control films, suggesting the potential of ML/LDPE_CAR films as sustainable and antioxidant food packaging systems to offer protection against lipid oxidation in foods. Sensory evaluation confirmed that ML/LDPE_CAR films provided the peanut samples with an extra aroma due to the volatile degradation products of β-carotene (such as β-cyclocitral or 6-methyl-5-hepten-2-ol).
Patrocinador/es: This research was funded by Generalitat Valenciana (FEDEGENT/2018/021) and the Packaging, Transport and Logistics Research Center (ITENE) (ITENE2-18Y).
URI: http://hdl.handle.net/10045/127059
ISSN: 2073-4360
DOI: 10.3390/polym14173550
Idioma: eng
Tipo: info:eu-repo/semantics/article
Derechos: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Revisión científica: si
Versión del editor: https://doi.org/10.3390/polym14173550
Aparece en las colecciones:INV - AAQCN - Artículos de Revistas

Archivos en este ítem:
Archivos en este ítem:
Archivo Descripción TamañoFormato 
ThumbnailJuan-Polo_etal_2022_Polymers.pdf2,12 MBAdobe PDFAbrir Vista previa


Este ítem está licenciado bajo Licencia Creative Commons Creative Commons