Estudio del comportamiento térmico y mecánico de un material óptico
Please use this identifier to cite or link to this item:
http://hdl.handle.net/10045/9737
Title: | Estudio del comportamiento térmico y mecánico de un material óptico |
---|---|
Other Titles: | Study of mechanical and thermal behaviour of an optical material |
Authors: | Fimia Gil, Antonio | Méndez Penín, María Jesús | Ulibarrena Estévez, Manuel | Mallavia Marín, Ricardo | Beléndez, Tarsicio | Cabeza, Isabel | Rodríguez, Fernando |
Research Group/s: | Holografía y Procesado Óptico |
Center, Department or Service: | Universidad de Alicante. Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal | Universidad Miguel Hernández. Departamento de Ciencia de Materiales, Óptica y Tecnología Electrónica | Construcciones Aeronaúticas, S.A. |
Keywords: | Optical materials | Mechanical behaviour | Thermal behaviour | Photopolymers | Holographic recording materials |
Knowledge Area: | Óptica | Física Aplicada |
Date Created: | 1999 |
Issue Date: | Jan-2000 |
Publisher: | Sociedad Española de Óptica |
Citation: | FIMIA GIL, Antonio, et al. "Estudio del comportamiento térmico y mecánico de un material óptico". Óptica Pura y Aplicada. Vol. 33, n. 1 (2000). ISSN 0030-3917, pp. 87-99 |
Abstract: | El conocimiento de las propiedades mecánicas de los materiales utilizados comúnmente para el registro de elementos ópticos difractivos es de gran importancia para predecir su comportamiento mecánico durante el procesado fotoquímico al que se les somete durante el grabado del patrón interferencial. Esto también proporcionará información sobre la estabilidad mecánica y térmica del holograma almacenado en estos materiales en los diferentes entornos en los que será aplicado definitivamente. Para evaluar cuantitativamente estas propiedades en un sistema fotopolimérico basado en acrilamidas se realizó un estudio sobre capas de polivinilalcohol (polímero soporte del sistema fotopolimérico). Las capas previamente depositadas sobre un sustrato de vidrio se sometieron a alto vacío y posteriormente a un cambio de temperatura. Las medidas en tiempo real de las variaciones de camino óptico sufridas por la capa se obtuvieron usando un sistema de medida interferométrico en alto vacío. | Evaluation of the mechanical properties of films of the materials currently employed for recording diffractive optical elements is very important in order to foresee their mechanical behavior during the photochemical processing following recording of the interference pattern. This will also provide information about the mechanical and thermal stability of holograms recorded on these materials, which may be tested in the different environments in which the final application of the optical element will be used. For quantitative evaluation of these properties in an acrylamide based photopolymeric system, a study was carried out on layers of films of polyvinyalcohol. Layers coated on glass substrate were subjected to both a high vacuum and temperature changes. Real time measurements of optical path variations in the film were performed using a vacuum interferometric measurement system. |
Sponsor: | Este trabajo fue financiado por el IMPIVA y por la Direcció General de Ensenyaments i Investigació de la Generalitat Valenciana (Proyecto GV-C-CN-06-064-96). |
URI: | http://hdl.handle.net/10045/9737 |
ISSN: | 0030-3917 |
Language: | spa |
Type: | info:eu-repo/semantics/article |
Rights: | © Sociedad Española de Óptica. La publicación original se encuentra en: http://www.sedoptica.es |
Peer Review: | si |
Appears in Collections: | INV - GHPO - Artículos de Revistas |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
OPA_v33_n1_p87_2000.pdf | 548,51 kB | Adobe PDF | Open Preview | |
Items in RUA are protected by copyright, with all rights reserved, unless otherwise indicated.