Comparison of Microwave-assisted, ultrasound-assisted and conventional solvent extraction techniques for the extraction of molybdenum with tributyl phosphate

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10045/92863
Información del item - Informació de l'item - Item information
Título: Comparison of Microwave-assisted, ultrasound-assisted and conventional solvent extraction techniques for the extraction of molybdenum with tributyl phosphate
Autor/es: Boucherit, Ahmed | Khalaf, Hussein | Bonete, Pedro | Todolí Torró, José Luis
Grupo/s de investigación o GITE: Grupo de Fotoquímica y Electroquímica de Semiconductores (GFES) | Análisis de Polímeros y Nanomateriales
Centro, Departamento o Servicio: Universidad de Alicante. Departamento de Química Física | Universidad de Alicante. Departamento de Química Analítica, Nutrición y Bromatología | Universidad de Alicante. Instituto Universitario de Electroquímica
Palabras clave: Molybdenum | Solvent Extraction | Microwave | Ultrasound | TBP
Área/s de conocimiento: Química Física | Química Analítica
Fecha de publicación: 2019
Editor: University of Mohammed Premier Oujda
Cita bibliográfica: Journal of Materials and Environmental Science. 2019, 10(3): 274-289
Resumen: The main objective of the current work was to evaluate the feasibility of Microwave-assisted Extraction (MAE) and Ultrasound-assisted Extraction (UAE) techniques as compared to conventional extraction for the extraction of molybdenum from HCl and H2SO4 solutions with TBP dissolved in n-hexane. The results show that the equilibrium time was drastically shortened under MAE and UAE from 10 min to 20 s and 03 min to 20 s for extractions conducted with HCl and H2SO4 solutions, respectively. Increase of HCl concentration increases the extraction yield of molybdenum under MW and UAE irradiations whereas the reverse was observed with the increase of H2SO4 concentration. For 1 M HCl, an increase in microwave power enhances slightly the extraction yield for microwave power greater than 60 W. An increase in ultrasound amplitude has slightly increased the extraction of molybdenum and lowered it for 0.10 M H2SO4. For a microwave power of 100 W and 1 M HCl, the extraction of molybdenum was 50% higer comparatively to conventional extraction. Also for 1 M HCl and for a pulse amplitude of 80%, the extraction yield was 100% much higher than the one obtained under conventional extraction. The application of MAE and UAE clearly highlights that molybdenum can be extracted by using these technologies and that it has contributed to improve the efficiency of conventional solvent extraction. under suitable process conditions.
URI: http://hdl.handle.net/10045/92863
ISSN: 2028-2508
Idioma: eng
Tipo: info:eu-repo/semantics/article
Derechos: © 2019, University of Mohammed Premier Oujda Morocco
Revisión científica: si
Versión del editor: http://www.jmaterenvironsci.com/Journal/vol10-3.html
Aparece en las colecciones:INV - GFES - Artículos de Revistas
INV - NANOBIOPOL - Artículos de Revistas
INV - bioCir - Artículos de Revistas

Archivos en este ítem:
Archivos en este ítem:
Archivo Descripción TamañoFormato 
Thumbnail2019_Boucherit_etal_JMaterEnvironSci.pdf978,43 kBAdobe PDFAbrir Vista previa


Todos los documentos en RUA están protegidos por derechos de autor. Algunos derechos reservados.