3 Dimensional analysis of holographic photopolymers based memories

Empreu sempre aquest identificador per citar o enllaçar aquest ítem http://hdl.handle.net/10045/9138
Información del item - Informació de l'item - Item information
Títol: 3 Dimensional analysis of holographic photopolymers based memories
Autors: Gallego, Sergi | Ortuño, Manuel | Neipp, Cristian | Márquez, Andrés | Beléndez, Augusto | Pascual, Inmaculada | Kelly, John V. | Sheridan, John T.
Grups d'investigació o GITE: Holografía y Procesado Óptico
Centre, Departament o Servei: Universidad de Alicante. Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal | Universidad de Alicante. Departamento de Óptica, Farmacología y Anatomía | University College Dublin. Departament of Electronic and Electrical Engineering
Paraules clau: Holography | Holographic recording materials | Volume holographic gratings
Àrees de coneixement: Óptica | Física Aplicada
Data de creació: 16-de març-2005
Data de publicació: 2-de maig-2005
Editor: Optical Society of America
Citació bibliogràfica: GALLEGO RICO, Sergi, et al. "3 Dimensional analysis of holographic photopolymers based memories". Optics Express. Vol. 13, No. 9 (May 2005). ISSN 1094-4087, pp. 3543-3557
Resum: One of the most interesting applications of photopolymers is as holographic recording materials for holographic memories. One of the basic requirements for this application is that the recording material thickness must be 500 μm or thicker. In recent years many 2-dimensional models have been proposed for the analysis of photopolymers. Good agreement between theoretical simulations and experimental results has been obtained for layers thinner than 200 μm. The attenuation of the light inside the material by Beer’s law results in an attenuation of the index profile inside the material and in some cases the effective optical thickness of the material is lower than the physical thickness. This is an important and fundamental limitation in achieving high capacity holographic memories using photopolymers and cannot be analyzed using 2-D diffusion models. In this paper a model is proposed to describe the behavior of the photopolymers in 3-D. This model is applied to simulate the formation of profiles in depth for different photopolymer viscosities and different intensity attenuations inside the material.
Patrocinadors: This work was supported by the "Oficina de Ciencia y Tecnología" (Generalitat Valenciana, Spain) under project GV01-130 GV04A/574 and GV04A/565, and by Science Foundation Ireland (SFI) Enterprise Ireland.
URI: http://hdl.handle.net/10045/9138
ISSN: 1094-4087
DOI: 10.1364/OPEX.13.003543
Idioma: eng
Tipus: info:eu-repo/semantics/article
Drets: This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-13-9-3543. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.
Revisió científica: si
Apareix a la col·lecció: INV - GHPO - Artículos de Revistas

Arxius per aquest ítem:
Arxius per aquest ítem:
Arxiu Descripció Tamany Format  
ThumbnailOEx_v13_n9_p3543_2005.pdf532,14 kBAdobe PDFObrir Vista prèvia


Tots els documents dipositats a RUA estan protegits per drets d'autors. Alguns drets reservats.