Effects of Fe addition on the mechanical and thermo-mechanical properties of SiC/FeSi2/Si composites produced via reactive infiltration

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10045/56035
Información del item - Informació de l'item - Item information
Título: Effects of Fe addition on the mechanical and thermo-mechanical properties of SiC/FeSi2/Si composites produced via reactive infiltration
Autor/es: Camarano, Antonio | Caccia, Mario | Molina Jordá, José Miguel | Narciso, Javier
Grupo/s de investigación o GITE: Materiales Avanzados
Centro, Departamento o Servicio: Universidad de Alicante. Departamento de Química Inorgánica | Universidad de Alicante. Instituto Universitario de Materiales
Palabras clave: SiC | Composites | CTE | Bending strength | Fe–Si
Área/s de conocimiento: Química Inorgánica
Fecha de publicación: jul-2016
Editor: Elsevier
Cita bibliográfica: Ceramics International. 2016, 42(9): 10726-10733. doi:10.1016/j.ceramint.2016.03.196
Resumen: Remaining silicon in SiC-based materials produced via reactive infiltration limits their use in high-temperature applications due to the poor mechanical properties of silicon: low fracture toughness, extreme fragility and creep phenomena above 1000 °C. In this paper SiC–FeSi2 composites are fabricated by reactive infiltration of Si–Fe alloys into porous Cf/C preforms. The resulting materials are SiC/FeSi2 composites, in which remaining silicon is reduced by formation of FeSi2. For the richest Fe alloys (35 wt% Fe) a nominal residual silicon content below 1% has been observed. However this, the relatively poor mechanical properties (bending strength) measured for those resulting materials can be explained by the thermal mismatch of FeSi2 and SiC, which weakens the interface and does even generate new porosity, associated with a debonding phenomenon between the two phases.
Patrocinador/es: Authors would like acknowledge the financial support received from the Generalitat Valenciana (PROMETEO II/2014/004-FEDER, PhD grant Vali+d and Santiago Grisolia program, GRISOLIA/2013/023), and the European Union's Seventh Framework Programme (FP7/2007-2013) under the HELM project, Grant agreement no. 280464 are gratefully acknowledged.
URI: http://hdl.handle.net/10045/56035
ISSN: 0272-8842 (Print) | 1873-3956 (Online)
DOI: 10.1016/j.ceramint.2016.03.196
Idioma: eng
Tipo: info:eu-repo/semantics/article
Derechos: © 2016 Elsevier Ltd and Techna Group S.r.l.
Revisión científica: si
Versión del editor: http://dx.doi.org/10.1016/j.ceramint.2016.03.196
Aparece en las colecciones:INV - LMA - Artículos de Revistas
Investigaciones financiadas por la UE

Archivos en este ítem:
Archivos en este ítem:
Archivo Descripción TamañoFormato 
Thumbnail2016_Camarano_etal_CeramInt_final.pdfVersión final (acceso restringido)3,58 MBAdobe PDFAbrir    Solicitar una copia
Thumbnail2016_Camarano_etal_CeramInt_accepted.pdfAccepted Manuscript (acceso abierto)1,33 MBAdobe PDFAbrir Vista previa


Todos los documentos en RUA están protegidos por derechos de autor. Algunos derechos reservados.