Abatement of hydrocarbons by acid ZSM-5 and BETA zeolites under cold-start conditions

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10045/40175
Información del item - Informació de l'item - Item information
Título: Abatement of hydrocarbons by acid ZSM-5 and BETA zeolites under cold-start conditions
Autor/es: Puértolas Lacambra, Begoña | López, José Manuel | Navarro, María Victoria | García Martínez, Tomás | Murillo, Ramón | Mastral Lamarca, Ana María | Varela Gandía, Francisco José | Lozano-Castello, Dolores | Bueno López, Agustín | Cazorla-Amorós, Diego
Grupo/s de investigación o GITE: Materiales Carbonosos y Medio Ambiente
Centro, Departamento o Servicio: Universidad de Alicante. Departamento de Química Inorgánica | Universidad de Alicante. Instituto Universitario de Materiales
Palabras clave: Cold-start | Vehicle emissions | Zeolites | Hydrocarbon trap | Stability
Área/s de conocimiento: Química Inorgánica
Fecha de publicación: abr-2013
Editor: Springer Science+Business Media New York
Cita bibliográfica: Adsorption. 2013, 19(2-4): 357-365. doi:10.1007/s10450-012-9458-3
Resumen: Simulated cold-start tests have been carried out to evaluate the performance of H-ZSM-5 and H-BETA zeolites as hydrocarbon traps under simulated gasoline car exhaust gases, paying special attention to the effect of water on their behaviour. It is concluded that the hydrothermal treatment of the zeolites in the acidic form contributes to the better performance of these materials as hydrocarbon traps since the stabilization of the zeolites takes place. Moreover, the decrease of the surface acidity of the zeolites results in an increase of the Si/Al ratio, which contributes to the decrease of the water affinity for adsorption sites. Thus, the competition with hydrocarbon molecules in the exhaust for the adsorption sites is reduced which increases their trap efficiency. The stabilized H-ZSM-5 is the zeolite that showed the best performance with a propene offset temperature of 240 °C, which should be high enough for the three-way catalyst to carry out its role as catalytic converter.
Patrocinador/es: The authors would like to thank Spanish Ministerios de Ciencia e Innovación – CSIC (Project 201080I031) y de Medio Ambiente y Medio Rural y Marino (Project 331/PC08/3-13.1) and Generalitat Valenciana and FEDER (PROMETEO/2009/047) for financial support. B. Puértolas thanks the Ministry of Education of Spain for FPU Grant (FPU Grant AP2009-3544), Dr. López contract is financed by Ramon y Cajal contract (RYC-2009-04483) and F.J. Varela-Gandía thanks the University of Alicante for the PhD studentship.
URI: http://hdl.handle.net/10045/40175
ISSN: 0929-5607 (Print) | 1572-8757 (Online)
DOI: 10.1007/s10450-012-9458-3
Idioma: eng
Tipo: info:eu-repo/semantics/article
Derechos: The final publication is available at Springer via http://dx.doi.org/10.1007/s10450-012-9458-3
Revisión científica: si
Versión del editor: http://dx.doi.org/10.1007/s10450-012-9458-3
Aparece en las colecciones:INV - MCMA - Artículos de Revistas

Archivos en este ítem:
Archivos en este ítem:
Archivo Descripción TamañoFormato 
Thumbnail2013_Puertolas_etal_Adsorption_final.pdfVersión final (acceso restringido)472,89 kBAdobe PDFAbrir    Solicitar una copia


Todos los documentos en RUA están protegidos por derechos de autor. Algunos derechos reservados.