Graphite–Cement Paste: A New Coating of Reinforced Concrete Structural Elements for the Application of Electrochemical Anti-Corrosion Treatments
Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/10045/57481
Título: | Graphite–Cement Paste: A New Coating of Reinforced Concrete Structural Elements for the Application of Electrochemical Anti-Corrosion Treatments |
---|---|
Autor/es: | Climent, Miguel-Ángel | Carmona Calero, Jesús | Garcés, Pedro |
Grupo/s de investigación o GITE: | Durabilidad de Materiales y Construcciones en Ingeniería y Arquitectura |
Centro, Departamento o Servicio: | Universidad de Alicante. Departamento de Ingeniería Civil |
Palabras clave: | Reinforced concrete | Graphite-cement paste | Electrochemical chloride extraction | Cathodic protection | Cathodic prevention |
Área/s de conocimiento: | Ingeniería de la Construcción |
Fecha de publicación: | 28-jul-2016 |
Editor: | MDPI |
Cita bibliográfica: | Climent M-Á, Carmona J, Garcés P. Graphite–Cement Paste: A New Coating of Reinforced Concrete Structural Elements for the Application of Electrochemical Anti-Corrosion Treatments. Coatings. 2016; 6(3):32. doi:10.3390/coatings6030032 |
Resumen: | This paper reviews research carried out towards the development of a novel conductive coating for reinforced concrete structures in order to enable the application of electrochemical anti-corrosion treatments. The coating is composed of a hardened paste containing graphite powder and cement. The applied techniques were electrochemical chloride extraction (ECE), cathodic protection (CP), and cathodic prevention, as well as combined treatments such as ECE-CP. This research has demonstrated their efficiency when using the new conductive coating as an anode system. The influence of the shape of the structural elements on the performance of the electrochemical treatments was also studied. Several characteristics of the coating have been determined, such as conductivity, durability, adhesion to the concrete surfaces, and ease of application. The results demonstrate the adequacy of using this coating as the anode for anti-corrosion treatments on reinforced concrete structural elements of different shapes, for the purpose of extending service life. |
Patrocinador/es: | This research was funded by the Spanish Ministerio de Economía y Competitividad (and formerly by the Spanish Ministerio de Ciencia e Innovación) and ERDF (European Regional Development Fund) through projects BIA2010-20548 and MAT2009-10866, and also through the project PROMETEO/2013/035 of Generalitat Valenciana (Spain). |
URI: | http://hdl.handle.net/10045/57481 |
ISSN: | 2079-6412 |
DOI: | 10.3390/coatings6030032 |
Idioma: | eng |
Tipo: | info:eu-repo/semantics/article |
Derechos: | © 2016 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC-BY) license (http://creativecommons.org/licenses/by/4.0/). |
Revisión científica: | si |
Versión del editor: | http://dx.doi.org/10.3390/coatings6030032 |
Aparece en las colecciones: | INV - DMCIA - Artículos de Revistas |
Archivos en este ítem:
Archivo | Descripción | Tamaño | Formato | |
---|---|---|---|---|
2016_Climent_etal_Coatings.pdf | 5,6 MB | Adobe PDF | Abrir Vista previa | |
Este ítem está licenciado bajo Licencia Creative Commons