Assessment of CO2 adsorption capacity on activated carbons by a combination of batch and dynamic tests

Empreu sempre aquest identificador per citar o enllaçar aquest ítem http://hdl.handle.net/10045/37034
Información del item - Informació de l'item - Item information
Títol: Assessment of CO2 adsorption capacity on activated carbons by a combination of batch and dynamic tests
Autors: Balsamo, Marco | Silvestre Albero, Ana | Silvestre-Albero, Joaquín | Erto, Alessandro | Rodríguez Reinoso, Francisco | Lancia, Amedeo
Grups d'investigació o GITE: Materiales Avanzados
Centre, Departament o Servei: Universidad de Alicante. Departamento de Química Inorgánica | Universidad de Alicante. Instituto Universitario de Materiales
Paraules clau: CO2 | Adsorption | Activated carbon | Carbon capture and storage | Global warming
Àrees de coneixement: Química Inorgánica
Data de publicació: 30-d’abril-2014
Editor: American Chemical Society
Citació bibliogràfica: Langmuir. 2014, Just Accepted Manuscript. doi:10.1021/la500780h
Resum: In this work, batch and dynamic adsorption tests are coupled for an accurate evaluation of CO2 adsorption performance for three different activated carbons obtained from olives stones by chemical activation followed by physical activation with CO2 at varying times, i.e. 20, 40 and 60 h. Kinetic and thermodynamic CO2 adsorption tests from simulated flue-gas at different temperature and CO2 pressure are carried out both in batch (a manometric equipment operating with pure CO2) and dynamic (a lab-scale fixed-bed column operating with CO2/N2 mixture) conditions. The textural characterization of the activated carbon samples shows a direct dependence of both micropore and ultramicropore volume on the activation time, hence AC60 has the higher contribution. The adsorption tests conducted at 273 and 293 K showed that, when CO2 pressure is lower than 0.3 bar, the lower the activation time the higher CO2 adsorption capacity and a ranking ωeq(AC20)>ωeq(AC40)>ωeq(AC60) can be exactly defined when T= 293 K. This result can be likely ascribed to a narrower pore size distribution of the AC20 sample, whose smaller pores are more effective for CO2 capture at higher temperature and lower CO2 pressure, the latter representing operating conditions of major interest for decarbonation of a flue-gas effluent. Moreover, the experimental results obtained from dynamic tests confirm the results derived from the batch tests in terms of CO2 adsorption capacity. It is important to highlight that the adsorption of N2 on the synthesized AC samples can be considered negligible. Finally, the importance of a proper analysis of characterization data and adsorption experimental results is highlighted for a correct assessment of CO2 removal performances of activated carbons at different CO2 pressure and operating temperature.
URI: http://hdl.handle.net/10045/37034
ISSN: 0743-7463 (Print) | 1520-5827 (Online)
DOI: 10.1021/la500780h
Idioma: eng
Tipus: info:eu-repo/semantics/article
Drets: This document is the Accepted Manuscript version of a Published Work that appeared in final form in Langmuir, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/la500780h
Revisió científica: si
Versió de l'editor: http://dx.doi.org/10.1021/la500780h
Apareix a la col·lecció: INV - LMA - Artículos de Revistas

Arxius per aquest ítem:
Arxius per aquest ítem:
Arxiu Descripció Tamany Format  
Thumbnail2014_Balsamo_etal_Langmuir.pdfAccepted Manuscript (acceso abierto)730,86 kBAdobe PDFObrir Vista prèvia


Tots els documents dipositats a RUA estan protegits per drets d'autors. Alguns drets reservats.