Analysis of the Imaging Characteristics of Holographic Waveguides Recorded in Photopolymers

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10045/107906
Información del item - Informació de l'item - Item information
Título: Analysis of the Imaging Characteristics of Holographic Waveguides Recorded in Photopolymers
Autor/es: Neipp, Cristian | Taleb, Soumia Imane | Francés, Jorge | Fernandez, Roberto | Puerto, Daniel | Calzado Estepa, Eva María | Gallego, Sergi | Beléndez, Augusto
Grupo/s de investigación o GITE: Holografía y Procesado Óptico
Centro, Departamento o Servicio: Universidad de Alicante. Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal | Universidad de Alicante. Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías
Palabras clave: Photopolymers | Diffraction gratings | Holographic waveguide | Holography
Área/s de conocimiento: Física Aplicada | Óptica
Fecha de creación: 29-may-2020
Fecha de publicación: 3-jul-2020
Editor: MDPI
Cita bibliográfica: Neipp C, Taleb SI, Francés J, Fernández R, Puerto D, Calzado EM, Gallego S, Beléndez A. Analysis of the Imaging Characteristics of Holographic Waveguides Recorded in Photopolymers. Polymers. 2020; 12(7):1485. doi:10.3390/polym12071485
Resumen: In this work, we study the imaging characteristics of an optical see-through display based on a holographic waveguide. To fabricate this device, two transmission holograms are recorded on a photopolymer material attached to a glass substrate. The role of the holograms is to couple the incident light between air and the glass substrate, accomplishing total internal reflection. The role of noise reflection gratings and shrinkage on the imaging characteristics of the device will be also explored. The holograms (slanted transmission gratings with a spatial frequency of 1690 lines/mm) were recorded on a polyvinyl alcohol acrylamide holographic polymer dispersed liquid crystal (HPDLC) material. We will show that sufficient refractive index modulation is achieved in the material, in order to obtain high diffraction efficiencies. We will demonstrate that the final device acts as an image formation system.
Patrocinador/es: This research was funded by The Ministerio de Ciencia e Innovación (Spain) grant number FIS2017-82919-R/(MINECO/AE/FEDER, UE). R.F. acknowledge the financial support by the Generalitat Valenciana (Spain) grant number APOSTD/2018/084.
URI: http://hdl.handle.net/10045/107906
ISSN: 2073-4360
DOI: 10.3390/polym12071485
Idioma: eng
Tipo: info:eu-repo/semantics/article
Derechos: © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Revisión científica: si
Versión del editor: https://doi.org/10.3390/polym12071485
Aparece en las colecciones:INV - GHPO - Artículos de Revistas

Archivos en este ítem:
Archivos en este ítem:
Archivo Descripción TamañoFormato 
ThumbnailNeipp_etal_2020_Polymers.pdf3,4 MBAdobe PDFAbrir Vista previa


Todos los documentos en RUA están protegidos por derechos de autor. Algunos derechos reservados.